• In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
  • Most users ever online was 31 on Thu Oct 22, 2015 2:37 pm
  • Users browsing this forum: No registered users and 1 guest
It is currently Mon Dec 11, 2017 5:49 pm
Change font size

Tech Talk

Wiring a 24 Valve VP44 Cummins

Post your technical threads here

Wiring a 24 Valve VP44 Cummins

Postby jeremylawson » Wed Mar 13, 2013 1:33 pm

Here is the basic wiring diagram for the 24 Valve Cummins.

To make it run you should only have to do this :

On the ECM you have a red/white wire at pins 48 and 50 they need 12v.

On the injection pump pin 7 red/ltgreen 12v.

Grounds are pin 6 (injection pump) and pins 30 and 49 on ECM, all are black/tan.

Then big wire to starter and neg to block and then jump the starter. The wait to start light is pin 37. That should be keyed power through the bulb and then the computer will ground it to turn it on.


ecm1.jpg


ecm.gif
Resistance is Futile.
User avatar
jeremylawson
Site Admin
 
Posts: 93
Joined: Sat Feb 13, 2010 7:15 pm
Location: Paris, TX and Deltona, FL.

Return to Tech Talk



cron

User Menu

Login

Login